The main feature
of this sytem is that it is able to keep
the height of digging both on a horizontal
and a sloping surface. Thanks to the wide
graphic display it is very easy and clear
to follow the digging height.
PITAGORA system has
a software that allows to memorize many
different types of buckets; with a simple selection it is possible to choose one of them
and work with its proper parameters previously set up.
PITAGORA
system uses a complex electronics
with microprocessors to work out the data
read by the sensors applied on the machine.
In
many situations such as sewerage,
founadations, line of communication etc.,
PITAGORA control
system increases the production giving the operator simple
directions. If the work to carry out
is a steep sloping such as the bank of
a road, the operator can easily follow
the digging progress on the display until
the achievment of the target.
The control of
the bucket position is very important
for this system, and this
is precisely calculated. This information is particularly useful when the
operator is making a very deep digging or when the bucket is under the water.
PITAGORA system also allows to work safely in those situations where the
escavator arm must work within precise position, such as in case of high
tension cables or inside a building. As previously said PITAGORA has been
studied to work together with a laser, because it allows to memorize the
datum heights given by the transmitter and to quicken the working set up.
Obviously this is valid both for horizontal and sloping digging.
|
