|
What
is dynamic weighing?
|
The dynamic weighing is
a special weighing tecnique that starts automatically
without taking the operator's attention off his work and that gives the opportunity
to read the weight without stopping the usual movements of the machine.
|
| |
DYNAMIC
WEIGHING FOR WHEEL LOADERS
|
| |
|
Description
of the dynamic weighing steps on wheel loaders
in motion:
1) Fill in the bucket.
2) The dynamic weighing starts automatically without any operator's
action while the machine is moving towards the truck that must be
loaded and it is lifting the arm. It is not necessary to stop the machine
or the arm lifting.
3) The weighing process takes about 1 - 2 seconds and it is not
affected either by the speed movements of the machine or by the the speed
lifting of the arm. The weighing takes place regularly if
you can hear and acoustic signal.
4)
After the weighing, the value is stored and added to the total value of
the material already loaded; the number
of bucket liftings is automatically increased.
When the arm comes down the system is
ready for a new weighing process without
stopping the machine or without any operator's
action. |
DYNAMIC
WEIGHING FOR ESCAVATOR
|
|
|
Description
of the dynamic weighing steps on excavator:
1 and 2) Fill in the bucket.
3) The dynamic weighing takes place automatically without any operator's
action . It is not necessary to stop the arm lifting. The weighing
can take palce in any position of the dipper arm and the weighing height can
be chosen by the operator according to the work he is carrying out.
4) The weighing process takes about 1 - 2 seconds and it is not
affected either by the speed movements of the machine or by the the speed
lifting of the arm. The weighing takes place regularly if
you can hear and acoustic signal.
5) After
the weighing, the value is stored and added to the total value of
the material already loaded; the number
of bucket liftings is automatically increased.
When the arm comes down the system is
ready for a new weighing process without
stopping the machine or without any operator's
action. |
DYNAMIC
WEIGHING ON TELESCOPIC HANDLERS
|
| The
dynamic weighing process on these machines
is the same as the one described for the wheel
loaders. |
| |
|
DYNAMIC
WEIGHING ON SKID LOADER
|
| The dynamic
weighing process on these machines is the same
as the one described for the wheel loaders. |
|
|
DYNAMIC
WEIGHING ON BACKHOE LOADERS
|
The dynamic
weighing process on these machines is the same
as the one described for the wheel loaders. |
|
|
DYNAMIC
WEIGHING FOR FORK LIFTS
|
|
|
Description
of the dynamic weighing steps on fork lifts
in motion:
1 and 2) Fill in the bucket
or lift the material with the fork.
3)
The dynamic weighing starts automatically without
any operator's action while
the machine is moving towards the truck
that must be loaded and it is lifting
the arm/fork. It is not necessary
to stop the machine or the arm/fork
lifting.
4) The weighing process takes about 1 - 2 seconds and it is not affected either
by the speed movements of the machine or by the the speed lifting of the fork.
The weighing takes place regularly if you can hear and acoustic signal.
5)
After the weighing, the value is stored and added to the total value of
the material already loaded; the number
of bucket liftings is automatically increased.
When the arm comes down the system is ready for a new weighing process without
stopping the machine or without any operator's
action. |
DYNAMIC
WEIGHING SYSTEM AND MIXING CALCULATION FOR
SELF LOADING MIXERS
|
|
|
