DYNAMIC
WEIGHING SYSTEM Thousands of SPRING machine
control dynamic weighing systems work on the market everyday.
Our systems give the client the opportunity to optimize the
production cycles avoiding wasting of time and money. These
kind of systems are often the only way to know the weight of
a load.
Dynamic
weighing system for wheel loader and
fork-lift
Field: quarries, yards, industry
Our
strength
Dynamic
weighing without any restrictions
BOOMERANG
the dynamic weighing system par
excellence!
We guarantee the excavator production,
i.e. the operator does not
need to stop the boom, he does
not need to put the dipper arm
in
a particular position, he does
not need to weigh before turning,
in
one word he does not waste time!
Weighing
point
BOOMERANG
let you choose the weighing point
wherever you
want along the boom. This feature
allows the operator to fit the
weighing system to the work he is
carrying out, this means that he
does not waste time!
A weighing system for excavator with
a fixed weighing point will
never be able to give the operator
the opportunity to measure the quantity
of material picked up
both from a digging and a heap
Planar
sensor
BOOMERANG
is the only weighing system that
check the planar position of
the carriage with the proper compensation
in the measurement of the
weight.
The tilt of the machine can be seen
in degrees on the display
Speed
compensation
BOOMERANG
is the only weighing system that
is able to calculate the weight
while compensating and showing at
the same time the lift speed of the
bucket .
Angular
sensors
BOOMERANG
is the only weighing system on the
market that uses angular sensors.
They are high precision devices that
must be installed both on the dipper
arm and on the boom in
order to check the rotation and allow
the calculation of the weight in
any point of the working
area.
The effect of centrifugal force in
the angle measurement can be noticed
during the machine
rotation in all the systems that
use the gravitational sensors (pendulum).
For this reason BOOMERANG uses angular
sensors that, thanks to a small mechanic
arm, can
measure the degrees of the angle
created between the carriage of the
machine and the boom and
of the one created between the boom
and the dipper arm.
This choice gives BOOMERANG the possibility
to weigh up to the first quarter
of the excavator
rotation without being disturbed
by the centrifugal force or the inertia
caused by the arm
movements.
more
info about to BOOMERANG:
[498Kb]
[530Kb]
Technical
features
Simultaneous visualization
of TOTAL LOAD, PARTIAL LOAD, N. of WEIGHINGS
TOTAL resetting
TOTAL management by
PARTIAL RESETTING, WEIGHING
of REMNANT in the BUCKET, MEASUREMENT
LAST BUCKET.
TARE function
Conversion to cubic meter
Storage by NAME of 20 different
kind of goods and 300 clients
FILES of the goods sold
to each single client
Direct selection of each
function and recovery of the data lost
PRINTING of the total loaded
and of the whole files
Input
voltage
8
- 30 Vdc
Electrical
input
min
7 W max 15 W
Protection
IP65
Big
blue graphic display
100
x 80 mm
Digit
dimensions:
17
x 12 mm
Shock-resistant
box made of special plastic
Instrument
weight:
1400
g
Instrument
dimensions
H
220x L 120 x D 80
Working
temperature
-
10 + 70°C
2
serial ports RS232C for data transfer/printer
Thermal
printer with snap device
Accuracy
±1± 3%
on the load
Accessories
Thermal
printer
[ On the ticket: DATE and TIME WEIGHT t/m3 CLIENT, GOODS ]
Printer
for delivery note
[Printing of Cliente legal name DATE and TIME, WEIGHT t/m3, CLIENT, GOODS
]
Data transfer
to PC with a software for the management
of the single sales.
Keyboard
dim. 15 x 8 x 5,5 For a quick
selection Client, goods.
SMALL MEMORY
can memorize up to
10.000 single sales.
SPRING machine
control via Monte Grappa, 5 - 28040 Dormelletto
(NO) - ITALY Tel. +39 0322 4011.11 r. a. FAX +39 0322
4011.40
